DMG MORI CTX GAMMA 3000 TC CNC MULTI TASKING TURNING AND MILLING CENTER
Ref #9345
This item is subject to prior sale or may be removed from availability without any notice.
This is not an offer of sale.
| Year | 2014 |
| Mfg | DMG MORI |
| Model | CTX Gamma 3000 TC |
| Swing Over Bed | 27.6" |
| Turning Diameter | 27.6" |
| Turning Length | 120.1" |
| Chuck Size 1, 2 | 20", 20" |
| Spindle Bore Diameter 1, 2 | 5.6", 4.6" |
| Bar Capacity 1, 2 | 5", 4" |
| Spindle Speeds 1, 2 | 2500, 2500 RPM |
| Spindle Horsepower 1, 2 | 79, 67 HP |
| B - Axis Head Indexing | + - 120 DEGREES |
| B - Axis Milling Spindle Speed | 8000 RPM |
| B - Axis Milling Spindle Taper | CAPTO C8 |
| B - Axis Milling Spindle Horse Power | 43 HP |
| ATC For Milling Spindle | 80 ATC |
| Tool Diameter | 3.14", 5" |
| Tool Length | 21" |
| Tool Weight | 26.4" |
| X - Axis Travel X1, X2, X3 | 25.6" |
| Z - Axis Travel Z1, Z2, Z3 | 120.1" |
| Y - Axis Travel Y1, Y2, Y3 | + - 7.9" |
| C - Axis Indexing 1, 2 | .001, .001 |
| W - Axis Travel Sub Spindle | 112" |
| Rapid Traverse Rates X1, X2, X3 | 1575 IPM |
| Rapid Traverse Rates Z1, Z2, Z3 | 1575 IPM |
| Rapid Traverse Rates Y1, Y2, Y3 | 1181 IPM |
| Machine Weight | 66,138 LBS. |
Equipped with
| 5 AXIS SIMULTANEOUS MACHINING | FULL C-AXIS ON BOTH SPINDLES |
| EXCENTRIC TURNING AND MILLING OPERATIONS | SPINDLE CHILLER FOR ALL THREE SPINDLES |
| ETHERNET, USB | SIEMENS ERGOLINE CONTROL WITH CELOS SOFTWARE |
| (2) 20" 3 JAW HYDRAULIC CHUCKS FRONT AND REAR SPINDLES | SMW AUTOBLOCK SLU 6 HYDRAULIC STEDAY REST 4.92" - 18.1" |
| HUMID ENVIROMENT AC SYSTEM FOR CONTROL | CAPTO C8 TOOL HOLDER AND PART PROBE |
| 2014 MFG DATE, INSTALLED NEW 2017 | UPGRADE 80 ATC MAGAZINE |
| CHIP CONVEYOR |
This item is subject to prior sale or may be removed from availability without any notice.
This is not an offer of sale.