MAZAK INTEGREX 200 IVST MULTI-TASKING TURN AND MILL

Swing Over Bed: 26.5''
Max Machining Dia. Upper / Lower Turret: 26'' / 10.6''
Max. Swing Over Lower Turret: 16.5''
Maximum Cutting Length: 61''
Spindle Bore Main: 2.99''
Spindle Nose : A2-8
Bar Capacity : 2.50''
Spindle Speeds: 5000 RPM
W - Axis Travel Sub Spindle: .0001 N/C CONTOUR
W - Axis Travel Sub Spindle: 22.8''
W - Axis Travel Sub Spindle: 60.82''
W - Axis Travel Sub Spindle: 5.91''
W - Axis Travel Sub Spindle: 58.66''
W - Axis Travel Sub Spindle: +/- 3.15''
W - Axis Travel Sub Spindle: 225 degrees
W - Axis Travel Sub Spindle: 5 DEGREE CLAMPING
W - Axis Travel Sub Spindle: 60.24''
Sub Spindle Speeds: 5000 RPM
Spindle Nose : A2-6
Spindle Bore Sub Spindle: 3.00''
Spindle Bore (First/Second): 2.5''
C - Axis Sub Spindle Minimum Indexing: .0001 N/C CONTOUR
Second Spindle Travel: 62.3''
Rapid Traverse Rate C, B : 555 RPM
Rapid Traverse Rate C, B : 1496 IPM
Rapid Traverse Rate C, B : 1496 IPM
Rapid Traverse Rate C, B : 1023 IPM
Rapid Traverse Rate C, B : 555 RPM
Rapid Traverse Rate C, B : 1181 IPM
Main Spindle Minimum Indexing: .001 DEGREE
Tool Magazine Capacity: 40 ATC KM
Lower Turret Positions: 9 tool drum
Lower Turret Milling Spindle Speeds: 0
Lower Turret Milling Spindle Speeds: 0.0000